Hosung®-FW140Y25 Oak
Hosung®-FW140Y25 Oak
3D Wood Grain Surface takes inspiration from real wood textures. lt looks like timber but performs far beyond what people would expect.
keywords：
Category：
|
Rot-resistant |
Termite-resistant |
Long-lasting color |
High Performance |
|
Maintenance-free |
Deform-resistant |
Easy to install |
Eco-Friendly |
COLOR & TEXTURES
3 SERIES OF DECKING COMPARISON
PRODUCT TESTING
DECKING ACCESSORIES&INSTALLATION
Two Type Of Clip Installation Instructions
Both Plastic And Stainless Steel Clips Can Be Used For Installation
|
Before fixing the joist, make sure the ground is clean and fat. Punching holes in the installation area with an impact drill. Knock the expansion pipe into the holes and make sure it is tight enough and will not be exposed. |
Take expansion pipes as the center line and lay joists on the line. Drill corresponding holes in the joist and fix the screws into the expansion pipes through the holes. |
 |
 |
|
Put the first decking board on the vertical way of a joist, and fasten the first decking board by screw(PS: do not use clips) outside the decking. The position and directions should be accurate and guaranteed to be the reference for the following decks. |
The first deck should be fastened directly by a screw instead of clips. Place the clip&screw in the right position and screw it. Insert the second decking board into the clips, then repeat this process. |
 |
 |
|
Two joists are needed for each deck at the juncture. In case of the deformation caused by temperature change, the joist should not be too tightly connected. We recommend a 3cm distance between two joists. |
Fasten the external sides of the last decking the same way as the first, and uninstall the end cover and decoration cover if necessary. |
 |
 |
INSTALLATION PROJECT
FACTORY STRENGTH
HOSUNG® is a company which interpreted wpc production,selling, design, and product developing .The company has advanced production technology,leading product development ability, a good reputation,management and technical service
PRODUCTION PROCESS
We sell composite decking, fencing, and wall cladding worldwide; we are committed to selling excellent quality and amazingly priced composite wood products to every client and distributor.
 |
 |
 |
||
| Get raw materials |  |
Mix all the raw materials | |
Extruded product |
 |
||||
 |
 |
 |
||
| Store products properly |  |
Fully packaged products | |
Cutting product carefully |
Hosung®-FW140Y25 Oak
3D Wood Grain Surface takes inspiration from real wood textures. lt looks like timber but performs far beyond what people would expect.
Color:
Width*Thickness: 140mm x 25mm
Standard Length: 2.2m, 2.9m, 3.6m
Application: Balcony, Terrace, Veranda, Garden, Swimming pool Coffee shop, etc
Ingredient: 55% wood fiber, 35% HDPE,10% additives
Certificates: FSC, CE, ISO 9001:2019, SGS, IS014001
Consultation
We will contact you within one working day. Please pay attention to your email.
Related Products
ABOUT HOSUNG
RESOURCES